# N-tech inventory for robots to achieve precise positioning

The robot has high requirements for positional accuracy in actual work. High positional accuracy is the embodiment of robot intelligence. What are the technologies related to robot position accuracy control? Let's look at it together!

Permanent magnet synchronous motors (PMSM) are commonly used for high efficiency, low power motor drives. High-performance motor control features smooth rotation over the entire speed range, full torque control at zero speed, and fast acceleration and deceleration. In order to meet the above requirements, PMSM uses vector control technology, which is also commonly referred to as field oriented control (FOC) technology. The basic idea of â€‹â€‹the vector control algorithm is to decompose a stator current into components generated by the magnetic field and components generated by the torque. After decomposition, the two components can be controlled separately; and the structure of the motor controller (ie, vector control controller) Almost the same as a DCMotor, which simplifies the PMSM control process.

Torque generation theorem

The electromagnetic torque of the PMSM is generated by the interaction of the two magnetic fields of the stator and the rotor, respectively. The stator magnetic field is represented by magnetic flux or stator current, which is represented by the magnetic flux of a constant permanent magnet (except for weak magnetic conditions). If the two magnetic fields are compared to two strip magnets, it is conceivable that the force of attracting/repelling the magnets is maximum when the magnets are perpendicular to each other. This means that the designer should control the stator current according to this theorem, that is, to create a stator vector perpendicular to the rotor's magnetic field. When the rotor rotates, the stator current must be updated so that the stator flux vector is perpendicular to the rotor magnet at 90 degrees.

When the stator and rotor magnetic fields are perpendicular, the electromagnetic torque equation of the embedded PMSM is: torque = 33ppPMIqs (pp is the number of pole pairs, PM is the flux of the permanent magnet, and Iqs is the amplitude of the current of the intersection). When perpendicular, the electromagnetic torque is proportional to the magnitude of the q-axis current. The microcontroller (MCU) has to adjust the stator phase current strength while adjusting the phase/angle, but this is not as easy to achieve as DC motor control.

Simplify current control to create optimal FOC performance

DC motor control is simple because all controlled quantities are steady state direct current (DC) values, and the current phase/angle is controlled by the mechanical commutator; but in the field of PMSM, how can field oriented control be achieved? technology?

DC value / angle control

First, the position of the rotor must be known, which is often related to phase A. We can use absolute position sensors (such as parsers) or relative position sensors (such as encoders) and handle the so-called "alignment". During the alignment process, the rotor is aligned with the A-phase axis so that the A-phase axis is aligned with the straight axis (the axis of the excitation component). In this state, the rotor position is set to 0; that is, the static voltage vector is constructed such that the required voltage is on the d-axis and the position is set to zero, which causes the stator field to attract the rotor and align the straight axis with the A-phase axis. . The three-phase quantity can be converted to an equivalent two-phase quantity by the Clarke transform. The amount in the two-phase stationary reference frame is then converted to the amount of DC in the two-phase rotating coordinate system by Park transformation, during which the rotor position is used.

The Electrical position of the rotor is the mechanical position of the rotor multiplied by the pole pair pp. After a series of controls, the designer should generate a three-phase AC voltage on the motor terminals, so the DC value of the required/generated voltage should be converted by the inverse Park/Clarke transform.

The mining intrinsically safe Explosion Proof Vfd is used for frequency conversion of belt conveyor, scraper conveyor, fan, water pump, pump station and other equipment. This explosion proof motor starter has a variety of control modes to choose from, wide speed range, flexible speed control, strong anti-interference ability and long service life, which is the best choice for downhole frequency conversion speed control device.

Explosion-proof MVD

Abb Vfd,Ac Variable Frequency Drive,Vfd Motor Drive,Flameproof Vfd,Explosion Proof Vfd,Explosion Proof Manual Motor Starter

FGI SCIENCE AND TECHNOLOGY CO., LTD , https://www.fgi-tech.com

This entry was posted in on